X
03000C
X
036000
'
'
'
•
Alternate Exception Action: None.
Explanation: A supported order that is not valid within a prologue was found in
a prologue.
The end of a segment was reached without an End Prologue order.
Alternate Exception Action: None.
Explanation: An attribute value for a graphic order or for a WGC Set Current
Default instruction is not supported.
Alternate Exception Action: Use the standard default value for that attribute.
Explanation: The Set Current Defaults instruction sets an invalid or unsupported
default for an attribute.
Alternate Exception Action: None.
Explanation: The specific character angle requested is not supported.
Alternate Exception Action: Use the closest angle supported by the printer.
Explanation: An End Prologue was found outside the prologue section of a
segment.
Alternate Exception Action: None.
Explanation: An End Area order has been executed without a Begin Area order
having previously been executed.
Alternate Exception Action: None.
146
6400 IPDS
'
X
' 03000C ' Segment Prologue Error
X
' 03000E ' Unsupported Attribute Value
X
' 030021 ' Invalid Default
X
' 033400 ' Character Angle Value Not Supported
X
' 033E00 ' Invalid End Prologue
X
' 036000 ' Area Bracket Error