IBM 6400 Programmer's Reference Manual page 173

X ' 021F01 ' Repeat String Length Error
Explanation: Repeat String control on a Write Text command has non-zero fill
count but zero string length.
Alternate Exception Action: None.
X ' 021F02 ' Mismatch of LFE Two-Byte Loaded Font ID Parameters
Explanation: Two fonts have been assigned the same two-byte Loaded Font ID
by the LFE command, but one or more of the following attributes differ: Character
Set ID, Code Page ID, Font (Style) ID, Uniform Character Increment, Proportional
Increment Coefficient Table.
Alternate Exception Action: None.
X ' 023101 ' Invalid LCC Number of Copies
Explanation: The Number of Copies value specified on the Load Copy Control
command is not a valid or supported value.
Alternate Exception Action: Proceed as though the number of copies field stated
1.
X ' 023201 ' Invalid LCC Keyword in Group Entry
Explanation: There is an invalid or unsupported Load Copy Control keyword in
the group entry.
Alternate Exception Action: None.
X ' 023401 ' Invalid LCC Copy Group Byte Count
Explanation:
1. The number of bytes in Load Copy Control group is not a multiple of two byte
pairs.
2. The number of bytes in Load Copy Control group is not a valid or supported
value.
Alternate Exception Action: None.
X ' 023601 ' Invalid or Unsupported Load Copy Control Simplex/Duplex
Parameter
Explanation: The LCC command simplex/duplex parameter is invalid or
unsupported.
Alternate Exception Action: If invalid, none. If unsupported, the printer prints
simplex.
X 021F01
'
Appendix A. IPDS Exception Reporting Codes
X 023601
' ' '
•
157