IBM 6400 Programmer's Reference Manual page 182

X 02AE01 X 02C801
' ' '
•
Explanation:
1. The X-Coordinate value on the Include Overlay command is not a valid or
2. The Y-Coordinate value on the Include Overlay command is not a valid or
Alternate Exception Action: None.
Explanation: There is insufficient storage to continue processing. Make sure any
fonts, overlays, and page segments that are not being used are deactivated. You
could also attempt to increase your host storage space.
Alternate Exception Action: None.
Explanation: More than one simplex operation keyword has been specified in an
LCC command copy group.
Alternate Exception Action: None.
Explanation: The first two bytes of two or more list entries on the Load
Equivalence command are not unique. Setting both external values to the same
value will not prevent the error.
Alternate Exception Action: None.
Explanation: The Mapping Type on the Load Equivalence command is not
X
Alternate Exception Action: None.
Explanation: An unsupported Input Media Source ID was specified in an
XOH-SIMS command.
Alternate Exception Action: Select an installed and available media source.
166
6400 IPDS
'
X ' 02AE01 ' Invalid Include Overlay Position Parameter
supported value.
supported value.
X ' 02AF01 ' Insufficient storage to continue processing
X ' 02C101 ' Maximum Number of Simplex Keywords in an LCC Command
X ' 02C102 ' Load Equivalence Internal Value Not Unique
X ' 02C602 ' Invalid Load Equivalence Mapping Type
' 0100 ' .
X ' 02C801 ' An unsupported Input Media Source ID was Specified