Mvs/Cics With Vtam In Dsc Mode (Local 3X74 Attachment) - IBM 6400 Programmer's Reference Manual

IPDS for Control Units
In conjunction with the above table entries, FMH-1 entries to begin and end IPDS
are required. The FMH-1 to begin IPDS is placed before the IPDS data stream
and the FMH-1 to end IPDS is placed after the IPDS data stream as shown below:
FMH-1 to begin IPDS:
X
IPDS Data Stream:
Insert an IPDS data stream here.
FMH-1 to end IPDS:
X

MVS/CICS with VTAM in DSC Mode (Local 3X74 Attachment)

The following examples represent some sample settings used with the printer in
DSC (non-SNA) mode with CICS and VTAM. Of the table settings listed below,
the following are required: FEATURE = EXTDS, TRMSTAT = TRANSCEIVE , and
FEATUR2 = EDATS.
TCT entries in CICS:
D72L032 DFHTCT
LOCAL entries for the Local Terminal table in VTAM:
194
6400 IPDS
RUSIZES=X ' 85C7 ' ,
PSNDPAC=X ' 01 ' ,
SRCVPAC=X ' 01 ' ,
PSERVIC=X ' 01000000E100185000007E00 '
' 0601300D4000 '
' 0601300D2000 '
TYPE=TERMINAL,
TRMIDNT=BL32,
Reference name for this TCT entry
ACCMETH=VTAM,
FEATURE=(COPY,COLOR,PS,EXTDS) ,
RELREQ=(YES,YES) ,
TIOAL=3000,
TRMMODL=2,
TRMSTAT=TRANSCEIVE ,
TRMTYPE=L3284,
RUSIZE=256,
NETNAME=D72L032,
As defined by VTAM local table
CLASS=(CONV,VIDEO) ,
ALTSCRN=(32,80),
ERRATT=NO