IBM 6400 Programmer's Reference Manual page 178

X 026B01 X 028101
' ' '
•
Explanation: The number of source image bytes received > the number implied
in the Write Image Control command.
Alternate Exception Action: None.
Explanation: On a Load Page Description command, the initial baseline
coordinate value is not a valid or supported value.
Alternate Exception Action: None.
Explanation: The units value in an XOH SMS command is invalid or
unsupported.
Alternate Exception Action: None.
Explanation: On the Set Media Size command, the X-extent is not a valid or
supported value.
Alternate Exception Action: None.
Explanation: On the Set Media Size command, the Y-extent is not a valid or
supported value.
Alternate Exception Action: None.
Explanation: On the Set Media Size command, the unit-base is not a valid or
supported value.
Alternate Exception Action: None.
Explanation: There is insufficient storage to process an overlay or page
segment.
Alternate Exception Action: None.
162
6400 IPDS
'
X ' 026B01 ' Excess Source Image Data
X ' 026B02 ' Invalid LPD Initial Baseline Coordinate
X ' 027002 ' Invalid Units Value in an XOH SMS Command
X ' 027202 ' Invalid SMS X-Extent
X ' 027302 ' Invalid SMS Y-Extent
X ' 027402 ' Invalid SMS Unit Base
X ' 028101 ' Insufficient Storage for Overlay or Page Segment