IBM 6400 Programmer's Reference Manual page 159

X ' 040600 ' Unit/Module Width Specified Is Not Supported
Explanation: The unit/module width specified in the Write Bar Code Data
Descriptor field is not supported.
Alternate Exception Action: Use closest smaller width supported or the device
default for those devices with only one fixed default value.
X ' 040700 ' Element Height Specified Is Not Supported
Explanation: The element height specified in the Write Bar Code Data Descriptor
field is not supported.
Alternate Exception Action: Use closest height supported.
X ' 040800 ' Height Multiplier Specified Is Not Supported
Explanation: The height multiplier specified in the Write Bar Code Data
Descriptor field is not supported.
Alternate Exception Action: Use closest multiplier supported.
X ' 040900 ' Wide/Narrow Ratio Is Not Supported
Explanation: The wide/narrow ratio specified in the Write Bar Code Data
Descriptor field is not supported.
Alternate Exception Action: Use the printer default wide element width. The
default wide element width and the specified or default unit/module width should
be such that a wide/narrow ratio of 2.50 or 3.00 results.
X ' 040A00 ' Invalid Symbol Reference Point
Explanation: The symbol reference point given in the Write Bar Code command
is not a valid or supported value.
Alternate Exception Action: None.
X ' 040B00 ' Invalid Bar Code Modifier
Explanation: The bar code modifier, byte 17 of the Bar Code Data Descriptor
structured field, is not a valid or supported value for the bar code type specified
by byte 16 of the same structured field.
Alternate Exception Action: None.
X 040600
'
Appendix A. IPDS Exception Reporting Codes
X 040B00
' ' '
•
143