Bar Code Output Control (Bcoc) - IBM 6400 Programmer's Reference Manual

Bar Code Command Set

Bar Code Output Control (BCOC)

The Bar Code Output Control structured field is the second structured field in the
DATA portion of the Write Bar Code Control command. This structured field
specifies the mapping option for the bar code object. This structured field is
optional and may not be present in the Write Bar Code Control command. The
format of the BCOC field is:
Table 96. Bar Code Output Control
Data Area Value
0-1 X 0010
'
2-3 X A66B
'
4
X 00
' '
5-6
X 3840
'
X 0960
'
7-8 X 0001
'
X FFFF
'
9-10 X 0001
'
X FFFF
'
11 X 30
' '
12-13 X ' 8000
14-15 X ' 8000
16-n
Figure 23 shows the BCOC field specifying the size of the bar code object on the
logical page.
120
6400 IPDS
BCAP BCOC BCDD
Length ID Data
Description
-X xxxx Length of Bar Code Output Control (BCOC)
' ' '
Structured Field ID
'
Unit Base (Measurement Units)
Unit Base is 10 Inches
L-Units per Unit Base
14400 L-units per 10 inches
'
2400 L-units per 10 inches
'
- X 7FFF X Extent of Bar Code Object in L-units
' ' '
See "Notation Conventions" on page 27
Use Logical Page Descriptor Value
'
- X 7FFF Y Extent of Bar Code Object in L-units
' ' '
See "Notation Conventions" on page 27
Use Logical Page Descriptor Value
'
Mapping Control Option (Position)
' - X ' 7FFF ' X Offset L-units See "Notation Conventions" on
page 27
' - X ' 7FFF ' Y Offset L-units See "Notation Conventions" on
page 27
Ignored
Error Code
X 0202..05
' '
X 020B..05
' '
X 0205..05
' '
X ' 0206..05 '
X 0207..05
' '
X 0207..05
' '
X 0208..05
' '
X ' 0209..05 '
X ' 0209..05 '