Using/Adjusting Disk Wheel Locks; Using Patient Operated Disk Wheel Locks - Invacare 9000XT Recliner Owner's Operator And Maintenance Manual

SECTION 9—ANTI-TIPPERS/WHEEL LOCKS
9000 XT WITH 0° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER SEAT-TO-FLOOR
SIZE HEIGHT
8-inch 17½, 18½ inches
6-inch 16½, 17½-inches
15½-inches
9000 XT WITH 3° SEAT-TO-FLOOR ANGLE AND 9000 SL (ADULT/HEMI FRAMES)
CASTER SEAT-TO-FLOOR
SIZE HEIGHT
8-inch 17½, 18½, 19½-inches 13½ / 3½-inches
6-inch 15½, 16½, 17½-inches 11-5/8 / 2¾-inches
9000 XT WITH 6° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER SEAT-TO-FLOOR
SIZE HEIGHT
8-inch 17½, 18½, 19½-inches 13½ / 2-7/8-inches
6-inch 16½, 17½-inches
15½-inches

Using/Adjusting Disk Wheel Locks

Using Patient Operated Disk Wheel Locks

DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are
not brakes.
NOTE:!For!this!procedure,!refer!to!FIGURE 9.3!on!page!53.
NOTE:!Position!wheelchair!on!a!flat,!level!surface!to!perform!this!procedure.
1. Ensure!the!wheelchair!is!not!moving!before!engaging!the!wheel!locks.
2. Depending!on!the!model!of!wheel!lock!installed!on!the!wheelchair,!perform!one!of!the!
following:
• Push#to#Lock!#!To!engage,!push!the!wheel!lock!handle!forward.
• Pull#to#Lock!#!To!engage,!pull!the!wheel!lock!handle!backward.
3. Disengage!the!wheel!locks!by!reversing!STEP!2.
9000 Series
ANTI-TIPPER ON CHAIR OFF CHAIR KIT NUMBER
LENGTH/HEIGHT
13½ / 3½-inches N/A
13½ / 3½-inches N/A
11-5/8 / 2-3/4-inches N/A
ANTI-TIPPER ON CHAIR OFF CHAIR KIT NUMBER
LENGTH/HEIGHT
1360
1360A
ANTI-TIPPER ON CHAIR OFF CHAIR KIT NUMBER
LENGTH/HEIGHT
N/A
12½ / 2¾-inches N/A
9½ / 2-3/8-inches N/A
WARNING
52
1058836
1058366
1058752
1058836
1058752
1113766
1113765
1113764
Part No. 1056953