Interface Settings - THOMSON 716 User Manual

Chapter 5
SpeedTouch™ Web Interface

5.6.8 Interface Settings

Overview
Configure
Assigning a new IP
address to the
SpeedTouch™
108
The Overview page gives you an overview of the current interface settings.
The Configure page allows you to:
Change the IP address settings of the SpeedTouch™.
Change the DHCP IP address pool settings.
Before changing the DHCP pools, make sure that at least one IP
!
address of the SpeedTouch™ uses the same subnet as the IP addresses
in the DHCP pools.
Under IP Addresses:
Type the IP address of your choice (for example 192.168.1.1) in the left text
1
box.
Type subnet mask in the right text box (for example 255.255.255.0).
2
Click Add.
3
Network devices using the same subnet mask can now access the
4
SpeedTouch™ using this IP address.
E-DOC-CTC-20050803-0002 v2.0