Access Via Ftp - THOMSON SpeedTouchTM706 User Manual

Chapter 1
Getting to know your SpeedTouch™

1.2.3 Access via FTP

To access the
SpeedTouch™ via the
File Transfer Protocol
File system
To open an FTP session
File system structure
10
You can access the file system of the SpeedTouch™ via the File Transfer Protocol
(FTP), in order to:
Restore or back up configuration files, templates or language packs.
(FTP)
Upgrade your configuration.
The SpeedTouch™ file system is stored on non-volatile memory and contains the
SpeedTouch™ software, service template files and (optionally) default setting files.
Proceed as follows:
1
Open a Command Prompt window.
In Microsoft Windows XP for instance:
1
2
2
At the prompt, type
(192.168.1.254 by default).
3
Enter your SpeedTouch™ security user name and password.
The default user is 'Administrator' and the default password is blank.
The example below shows an FTP session to the SpeedTouch™ file system.
The structure of the file system is very simple: it consists of a single root directory
called root and a subdirectory called
The root directory contains:
all the necessary files for the SpeedTouch™ to start correctly
the dl directory
The dl directory contains the software image.
If you made changes to the SpeedTouch™ configuration and saved
them, a user.ini configuration settings file is created in the
subdirectory.
On the Windows taskbar, click Start.
Select ( All) Programs > Accessories > Command Prompt
ftp
followed by the IP address of your SpeedTouch™
dl (download).
.
dl
E-DOC-CTC-20051017-0148 v1.0