NOTE
This icon is only displayed when the appropriate imager is installed in your
Omnii. If there is an imager installed but this icon is not present, additional soft-
ware (ICS) may need to be installed.
To enable a newly-installed imager, Press and hold down the [FN] key and the
[Enter/Power] key simultaneously for a minimum of three seconds.
Input Panel
The Omnii is equipped with a Soft Input Panel (SIP). Shown below is the standard Microsoft SIP, accessed
from the Control Panel.
Tapping on the Input Panel button displays a soft input panel (soft keyboard) that can be customized using the
Input Panel dialog box.
Configuration 3 - 31
Soft Keyboard
Input Panel
Button Icon