Mode; About - Motorola 7545MBW User Manual

Mode

Turn on Bluetooth activates the Bluetooth radio.
Discoverable determines whether the Omnii is visible or invisible to other devices.
Printer Port allows you to assign and enable a virtual outgoing COM port selected from the drop-down menu
to communicate with a paired Bluetooth printer. Keep in mind that when a port is chosen, the printer must be on
and connected to the chosen port for a remote device to be able to connect.
• Select a port within the Printer Port drop-down list, e.g. BSP1:
• Check the Printer Port check box.
• Open the Device tab and tap on Scan.
• Tap-and-hold each Bluetooth Printer device entry and then select Pair, key-in the Passcode (if needed)
and then tap Done. DO NOT select any services!
• Close the Bluetooth Manager.
• Select the Bluetooth device to print to — you will need to key-in (or programmatically raise) the following
key sequence [CTRL] [ALT] [F1].
• You can now select the Bluetooth device to which you wish to print.
Allow Bluetooth to wake system allows remote Bluetooth devices to wake the Omnii by requesting a Blue-
tooth service that requires host intervention. This feature can also be used when the Omnii is waking from
suspend to significantly to reduce the initialization time of the Bluetooth system.

About

Device Name displays the broadcasted name of the hand-held. The name can be changed in the System
Properties applet: Start>Settings>Control Panel>System icon>Device Name tab.
Configuration 3 - 17