Data Transfer Between Omnii And A Pc; Uploading Data In A Docking Station - Motorola 7545MBW User Manual

3 - 22 Omnii Hand-Held with Windows CE 6.0 User Manual
When the compass recalibration is complete, a message appears on the Omnii screen indicating
successful calibration.
NOTE
The accuracy of the digital compass is affected by the following:
a) close proximity to large magnets or metal structures, and
b) internal scanner/imager activation.

Data Transfer between Omnii and a PC

Data transfer options vary slightly depending on the type of operating system installed in your PC.
For Windows XP SP2 operating systems or earlier, Microsoft
to connect your Omnii to PCs.
If the Windows Vista
to transfer data between your Omnii and your PC.
By using a Snap Module or Desktop Docking Station with your Omnii, you can connect to a PC with a cable to:
• View Omnii files from Windows Explorer.
• Drag and drop files between the Omnii and the PC in the same way that you would between PC drives.
• Back up Omnii files to the PC, restore them from the PC to the hand-held again, etc.

Uploading Data in a Docking Station

The Desktop Docking Stations allow your hand-held to upload transaction data to a server computer when a
radio link is not available. When the Omnii is properly inserted in a docking station, a dock icon is displayed in
the taskbar at the bottom of the unit screen. For detailed information, refer to
Models ST4002 and ST4003" on page
®
, Windows 7 or later, operating system is installed in your PC, ActiveSync is not required
4-11.
® ®
ActiveSync connectivity software can be used
"Desktop Docking Stations -