Power Accessories; Snap Modules - Motorola 7545MBW User Manual

Power Accessories

The following accessories can be ordered for your Omnii:
AC Wall Adaptor
Vehicle Power Outlet Adaptor
Snap Module – Charger Only
Snap Module – USB Host/Client plus Charger
Snap Module – DE9M powered serial plus Charger

Snap Modules

NOTE
The Snap Modules are shipped with their own quick start guide (Omnii Snap Modules
Quick Start Guide, PN 8000220). The guide should be reviewed for additional informa-
tion and updates.
Snap Modules are mobile power chargers for the Omnii. They are compatible with the AC wall adaptor
(Model ST1050 or ST1050-AR) and the Vehicle Power Outlet Adaptor (Model ST3113).
Three types of Snap Modules are available:
• Model ST4000 (Charger only variant): powers and charges the hand-held.
• Model ST4001 (USB variant): powers and charges the hand-held. It provides communications via USB
1.1/2.0 Host and USB 2.0 Client connectors and provides a DC IN port. When attached to the Omnii, it
allows ActiveSync or Windows Mobile Device Center connectivity with your PC, and the use of a USB
device such as a USB memory key or supported peripheral.
• Model ST4005 (Serial variant): provides a powered DE9M serial connector. It powers and charges the
Omnii, and provides serial communications to tethered devices. The DE9M connector is capable of speeds
up to 115,200 bps. Pin 9 is reserved for 5V power out and is defaulted to off. To enable power to this port,
in your Omnii desktop, go to Control Panel>Scanners, which opens the Scanner Settings menus. In the
Ports menu, select on for the Power parameter under the COM6 port.
Description
Accessories 4 - 7
Model Number
ST1050 or ST1050-AR
ST3113
ST4000
ST4001
ST4005