Lock Sequence - Motorola 7545MBW User Manual

Virtual Key, Function and Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scan code will be remapped:
Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent. If No
Force is selected, the shift state is dependent on whether the shift state is on or off at the time the virtual key is
sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
• Choose Virtual Key, Function or Macro.
• Choose a function from the Function list in the dialog box, and tap on OK.
Editing a Scancode Remap
To edit a scancode:
• In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.
Removing a Remap
To delete a remap:
• In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Remove
button.
• Tap on OK.

Lock Sequence

The Lock Sequence menu allows you to lock the Omnii keyboard to prevent keys from being pressed acciden-
tally when, for example, the unit is inserted in a holster.
• To lock the keyboard, tap in the check box next to Enable key lock sequence.
• Tap in the check box next to Keyboard locked at startup.
• In the Key sequence drop-down menu, choose the key sequence you will need to type to unlock
the keyboard.
Configuration 3 - 39