Finalizing the Installation
Center Log Installation
The log shelf has two tabs
used to align the center log.
Bend these tabs as shown to
the right.
Place the center log in place.
Make sure the two tabs on the
log shelf insert into the two
holes on the bottom of the log.
Once in place,
rotate the log
clockwise until
the indents in the
log contact the
grate.
Front Left Log
Place the front left log as shown below. There is a ledge on the bottom of the log that aligns with the
edge of the center burner.
© Travis Industries
(for qualified installers only)
Bend these two tabs up 90°. They are used
as pins to locate the center log.
4140729
43
100-01404