Activating/Deactivating Do Not Disturb - Siemens HiPath 4000 Operating Instructions Manual

Conducting calls – enhanced functions
Step by Step
> <
BASIC SERVICE
> <
Feature settings
> <
DO NOT DISTURB
Activate
Deactivate
68

Activating/deactivating do not disturb

If you do not wish to take calls, you can activate do not
disturb. Internal callers will hear the ringing tone and the
announcement "Do Not Disturb"; external calls will be
diverted to the attendant. System Support can also set
up call forwarding destinations for the Do Not Disturb
function, to which you can forward your internal and
external calls.
Prerequisite: System Support has enabled the Do Not
Disturb function for all extensions.
u Open the system menu.
[
Select and confirm the basic service.
Either:
2 2 Enter the service code.
or:
[
Select the menu item and confirm.
[
Select the menu item and confirm. The display indi-
cates whether Do Not Disturb is activated or not.
then:
[
Confirm the display if "Do Not Disturb" should be
activated.
[
Confirm the display if "Do Not Disturb" should be
deactivated.
Caution:
A tone reminds you that Do Not Disturb is
activated when you seize the trunk.
The attendant can circumvent the Do Not Disturb
function and reach you anyway.
If System Support has locked the Do Not Disturb
function for all users, the item "Do Not Disturb"
will not appear on the service menu.