Using The Camp-On Function - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
> <
STOP VIEWING?
> <
RELEASE PARTY?
> <
REM LAST PTY?
> <
BASIC SERVICE
> <
Feature settings
> <
Camp-on
Activate
Deactivate
[
Select and confirm to end the display.
or:
[
Select and confirm to disconnect this member from the
conference. If there were only three members, the
conference is now ended.
Disconnecting the last member added
You wish to disconnect the last member added to the
conference.
[
Select and confirm the option shown. The last member
added is disconnected. If there were only three
members, the conference is now ended.

Using the camp-on function

If you are expecting an important call, you should acti-
vate the camp-on function. A second call will then be
signalled while a call is in progress. You can accept or
ignore the second call.
Caution:
A second call is not signalled on the Bluetooth
headset.
Activating and deactivating the camp-on function
u Open the system menu.
[
Select and confirm the basic service.
Either:
2 Enter the service code.
or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
then: Activating or deactivating
[
Confirm one of the two displays.
[
91