Setting The Conversion List For Vcard Transfer - Siemens HiPath 4000 Operating Instructions Manual

Setting the handset
Step by Step
u v
Ï
Settings
s t
Telephony
s t
Area Codes
36
Setting the conversion list for vCard
transfer
Caution:
Can only be set if this menu item is visible. To set,
see
See also Gigaset QuickSync
Phone numbers are usually specified as follows in
e-mail programs, such as Microsoft Outlook for exam-
ple: +49 (05251) 820776. The handset is unable to use
this format, however, to dial the phone number. If the
phone number above is a local fixed network number, it
is converted to 0820776, for instance, when dialled.
The conversion pairs are defined in the conversion table
and can be modified if they deviate from the default
values.
Consult your system administrator about the conver-
sion rules that apply to your handset.
v Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The conversion
table is displayed.
o
Change entry
Press the up/down control key to navigate to another in-
put field; Press the left/right control key to move the cur-
sor within an input field.
Save setting.
Save
a Press the On-hook key to end the operation.
Page 37.
Page 107.