Deactivating The Ringer; Activating Do Not Disturb; Activating/Deactivating Do Not Disturb - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Ringer off
Ringer off
Ringer off
>
04=Do Not Disturb?
Switch on?
Switch off?
48

Deactivating the Ringer

If you do not want to be disturbed by an incoming call
ringing, you can deactivate the ringer.
Prerequisite: A function key must be configured (see
page 90).
Press the Ringer off key.
The LED is on.
This setting remains in effect as long as the LED
is on.
If there's an incoming call, the ringer sounds one time
and then remains mute.
The Ringer off LED blinks.
To deactivate the function, press the "Ringer off" key
again.
The LED goes out.

Activating Do Not Disturb

Another way of avoiding disruptive incoming calls is to
activate the Do Not Disturb function. When this func-
tion is activated, your telephone will not ring for incom-
ing calls. The caller will hear the busy tone.
If you have a multiline telephone, this function is
only available for the prime line.
Prerequisite: Do Not Disturb must be permitted, other-
wise the menu option will not be available (see
page 75).

Activating/Deactivating Do Not Disturb

:
Select and confirm.
>
:
Confirm. The new setting is displayed.
>
or
:
Confirm. The new setting is displayed.
>
If the word "or" is blinking in the idle display, the mes-
sage "Do not Disturb - set" is displayed.