Setting The Base - Siemens HiPath 4000 Operating Instructions Manual

Additional functions
Step by Step
u v
Ï
Settings
s t
System
s t
Base Reset
> < [
104
The Cordless system overwrites the display information
"Name base station" with the own phone number as
soon as an incoming or outgoing call is initiated. In this
case, the name of the base station only reappears after
the handset has been switched off and back on again.

Setting the base

Caution:
Can only be set if this menu item is visible. To set,
see
You can configure individual settings on your system
with your handset depending on how your system is
configured.
v Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
Select the required menu item and confirm.
Page 37.