Data Communication With The Pc - Siemens HiPath 4000 Operating Instructions Manual

Step by Step

Data communication with the PC

To enable your handset to communicate with the PC,
the Gigaset QuickSync program must be installed on
your PC (free to download at
prise.com/wiki/Gigaset_professional_accessory)
After installing "Gigaset QuickSync", connect the hand-
set to your computer using Bluetooth
a USB data cable
Transferring data
Start the "Gigaset QuickSync" program. You can now:
• Synchronise your handset's address book with
Outlook
• Download caller pictures (.bmp) from the computer
to the handset
• Download pictures (.bmp) as screensavers from the
PC to the handset
• Download sounds (ringer melodies) from the PC to
the handset
"Data Transfer" is shown on the display during data
transfer between the handset and PC. During this time,
the keypad is disabled and incoming calls are ignored.
Caution:
• If the USB data cable is plugged in, a Blue-
tooth connection cannot be established.
• If a USB data cable is plugged in during an
existing Bluetooth connection, the Bluetooth
connection is cancelled.
Additional functions
http://wiki.siemens-enter-
Page 108 or via
Page 18.
107