Connecting Up The Video/Pvr - Kathrein UFS 740sw Operating Manual

CONNECTING UP THE VIDEO/PVR

For details of how to connect your external recorder to the receiver refer to the connection diagram
provided at the end of this manual and the instructions for the external recorder.
RECORDING
In order to make a PVR recording (Record), the satellite receiver must be switched on or the timers must
be pre-programmed (see "EPG" "Recording (timer)" section).
PLAYBACK
For VCR/PVR playback you must have previously set the UFS 740sw Scart socket to "VCR mode"
(Scart changeover), using the button, so that the signal path is set up from the VCR or PVR/AUX Scart
socket to the TV Scart socket.
In this setting, the picture from the external recorder is switched through to the TV set during playback.
button again restores priority to the UFS 740sw "Scart → Sat" signal. In the setting
Pressing the
"Scart → TV" (TV mode) the internal tuner of the TV set has priority and you cannot then see the signal
from the receiver on the screen if you switch the TV set to the AV channel.
The settings "VCR mode" and "TV mode" are shown in the display on the receiver.
74