Series Recording - Kathrein UFS 740sw Operating Manual

EPG - ELECTRONIC PROGRAMME GUIDE
When all settings have been made, press the
the scheduled recording in the recording schedule view of the EPG (see item "Recording schedule").

SERIES RECORDING

Series recording depends on the EPG data being kept up to date at all times. The
receiver automatically updates the EPG data when the unit is switched off by
pressing the
to recognise for purposes of recording any changes to scheduled transmission
times of the series, provided these were incorporated in the EPG data supplied
by the channel provider in advance of the latest EPG update.
Use the buttons to select the
recording mode "Series recording".
In series recording the start and fi nish
of recording are taken automatically by
the receiver from the EPG data. You
can only specify a lead-in and run-out
time to be sure to record the complete
programme even
times may vary slightly. The setting
of lead-in and run-out time is done
using the buttons or the
keypad.
When all settings have been made, press the
the scheduled recordings in the recording schedule view of the EPG (see item "Recording schedule").
48
button. Updating is important because it enables the receiver
if transmission
button to save the recording settings. You can view
button to save the recording settings. You can view