Kathrein UFS 740sw Operating Manual page 64

Press the button to move to the next selection item.
Transponder frequency
Use the buttons or the keypad to select the transponder frequency on which the channel being
sought is transmitted. At the bottom right of the screen display, the receiver shows the current signal
strength and signal quality of the selected transponder.
Press the button to move to the next selection item.
Service ID
Using the buttons or the keypad, enter here the service ID of the channel being sought.
When you have made your settings, use the
to start scanning. You can cancel the scan at any time by pressing the
During the scan you will see a display that shows you the progress of the scan.
After completion of the scan, you will see the following message (example):
Press the button. You will be asked whether you wish to save the changes or not. Selection is performed
using the buttons and is confi rmed using the
found channels will be added to the end of the channel list. Then press the
The channel list is called up on to the TV screen by pressing the
displays" "Channel list TV/Radio").
64
CHANNEL SEARCH (CHANNEL SCAN)
buttons to select "Start Search" and press the
button. If you select "Yes, save changes", the newly
button (see also section "On-screen
button.
button to exit the menu.
button