Kathrein UFS 740sw Operating Manual page 24

Dvb satellite receiver

Table of Contents

FIRST INSTALLATION: One cable (manual)

Secure channel with PIN

If your single-cable system allows the transmission frequency to be protected by inputting a PIN, this is the

menu where that can be done. No other receiver can then use that transmission frequency unless the

PIN is input.

Select the setting "Yes" using the

buttons. A line with the text "Password PIN" is then displayed.

Press the

buttons to select this line. You can now use the number buttons to enter a PIN (0-255).

Test connection

When you have completed all the settings, press the

buttons to switch to the "Test connection"

selection ﬁ eld and press the

button. The receiver now tests whether a connection to the single-cable

system can be established or not. As soon as the receiver has established a connection to the

single-cable system, you will see the following display:

Conﬁ rm this display with the

button. Then press the

button. You will be asked whether you wish to save

the changes. Use the

buttons to select "Yes, save

changes" and conﬁ rm by pressing the

button. Now

press the

(green) button.

The receiver will automatically display the menu for the channel search. Continue with the section (Execute

channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings (frequency and transmission channel) and if necessary call for expert help.

Table of Contents

Show Quick Links

Table of Contents