Kathrein UFS 740sw Operating Manual page 69

FUNCTIONAL SCOPE
Here you can confi gure the functional scope of your receiver. You can choose between "High", "Normal"
and "Low". The following table shows which functions are available at each confi guration step.
(red) button
High Select favourites
Low Not assigned
Normal Select favourites
DISPLAY DURATION OF CHANNEL MESSAGE
Use the buttons to select the time after which you want the on-screen channel message display
to be automatically cancelled. The selections available are "Off", 1, 2, 3, 4, 5 or 6 seconds.
DISPLAY VOLUME BAR
Use the buttons (On/Off) to specify whether the volume bar is displayed when adjusting the
volume.
RECEIVER FRONT DISPLAY BRIGHTNESS
Use the buttons to set the brightness of the receiver front display. Select the most comfortable
setting for the ambient lighting.
RECEIVER FRONT DISPLAY IN STANDBY
Use the buttons to set whether the receiver front display should be switched on or off in stand-by
mode (display of time).
OSD POSITION ALIGNMENT
Press the button to align the on-
screen displays on the TV screen.
Now you can use the cursor buttons
( ) to determine the position
of the on-screen display. When you have
achieved the desired position, press the
button to fi x the selected position.
SETTINGS
(yellow) button (blue) button
Select options TV/Radio
Not assigned Not assigned
Select options TV/Radio
button
AV changeover Channel list
Not assigned Programme Guide
Not assigned Programme Guide
button
69