Configuring The On-Screen Menu - Kathrein UFS 740sw Operating Manual

VCR SCART SIGNAL OUTPUT
Here you can use the
signal that your external recorder can process. When doing this, refer to the operating instructions
for your recorder!
• Composite baseband signal
(colour/picture/blanking/synchronous signal)
• Y/C – S-Video signal (luminance/chrominance)
TV STANDARD
Here, you can use the
• PAL or
• NTSC set.
AUTOM. DOLBY DIGITAL OUTPUT
Here you can use the
Dolby Digital signal (if this is transmitted).
AUDIO DELAY
Here you can use the
is out of synch with the TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from
10 ms up to 200 ms.

CONFIGURING THE ON-SCREEN MENU

68
SETTINGS
buttons to select the type of video signal at the VCR Scart socket. Select the
buttons to specify whether your TV set is a
buttons to select whether the receiver should automatically output the
buttons to set a delay in milliseconds, if the sound output from your receiver