Table of Contents
Advertisement
When
satellite(s), make sure
that
your
position is aligned to
the desired satellite(s)!
The
installation
CAP 900 automatic turntable unit
is explained in the installation
manual supplied with the turntable
unit.
System
Select the setting here to match your reception system using the
is DiSEqC™-capable, at System select "DiSEqC™ 1.0" (allows switch-over from receiving one satellite
to receiving another one). If your reception system is DiSEqC™-capable, select the setting "LNB only".
Press the
button to move to the next menu item.
For ease of understanding, the further explanations of the fi rst installation are split into two columns.
The description on the left refers to installation of a non-DiSEqC™-capable system and on the right
to installation of a DiSEqC™-capable system.
Satellite and position
Use the
buttons to select the desired satellite
whose signal is to be received by the tuner.
When you have selected your desired satellite,
use the
buttons to switch to the selection of
the "LNB Type".
FIRST INSTALLATION
selecting
the
reception
fi rst
with
a
buttons. If your reception system
Number of satellites
Press the
button to select the satellite to be
received.
The following display appears:
17
Hide quick links:
Advertisement
Table of Contents
