Kathrein UFS 740sw Operating Manual page 28

FIRST INSTALLATION: One cable (manual)
Selection "EXR 4 Subscribers"
When a Kathrein single-cable
switching matrix is used for four
subscribers, it is essential the LNB
is set to "Universal"!
Transmission channel
Use the buttons to select a free available transmission channel. A maximum of four transmission
channels are available (1284, 1400, 1516 and 1632 MHz).
Test connection
When you have set a free transmission channel, press the
selection fi eld and press the
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
Confi rm this display with the
button. You will be asked whether you wish to save
the changes. Use the
changes" and confi rm by pressing the
press the (green) button.
The receiver will automatically display the menu for the channel search. Continue with the section (Execute
channel search).
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert help.
28
button. The receiver now tests whether a connection to the single-cable
button. Then press the
buttons to select "Yes, save
button. Now
buttons to switch to the "Test connection"