Kathrein UFS 740sw Operating Manual page 20

Use the buttons here to select "One cable" as the "System". Press the
menu item. The following display appears:
The various options for a
single-cable system with
Kathrein components
are summarised at the
end of this manual in the
"Technical Appendix"
sectionunder "Examples of
Single-Cable Systems".
Number of satellites
Use the buttons to select how many satellites (max. 2) you would like to receive with your reception
system. Press the
Confi gure satellites
Press the button to open the menu. The following display appears:
Satellite and Position
Use the buttons to select the fi rst satellite (satellite 1 of 2, depending on the setting) as shown on
the screen.
LNB settings
Here use the buttons to select the LNB type used in your system. The choice is between "Universal",
"Wideband" and "user-defi ned".
If in your reception system you use a single-cable LNB (e.g. UAS 481 from Kathrein), please select
here the setting "Wideband". If you use a single-cable matrix (EXU 908) or a single-cable switching
matrix (EXR 551 or EXR 552) from Kathrein, the LNB you use must be a "Universal LNB"!
20
FIRST INSTALLATION: One cable
button to move to the next menu item.
button to move to the next