Tv And Video Recorder Connection; Audio Connection; Inserting Batteries Into The Remote Control - Kathrein UFS 740sw Operating Manual

TV AND VIDEO RECORDER CONNECTION

Connect the satellite receiver (Cinch socket) and the TV set (Scart socket) using the Cinch to Scart cable
supplied, or connect both units (Scart sockets) using a Scart cable (see "Connection Example"). If your TV
has a stereo feature, you can receive the sound in stereo via the Scart connection. Use a further Scart cable
to connect the satellite receiver (VCR/Scart socket) to the video recorder/PVR.
For system reasons, the same video signals are to be found at the TV Scart socket as at the video cinch
output.
If you are recording using an external video recorder, remember not to operate the
receiver during recording, otherwise all the on-screen displays will appear on your
recording.

AUDIO CONNECTION

If you want to play the sound on your hi-fi system, connect the audio cinch sockets to the input sockets
on the hi-fi system, using an appropriate cable (see "Connection Example").
OPTICAL/ELECTRICAL DIGITAL OUTPUT
The fi bre-optic output and the electrical digital output are intended for the connection of a Dolby Digital
system (see "Connection Example").

INSERTING BATTERIES INTO THE REMOTE CONTROL

Remove the cover on the rear of the remote control.
Insert the two supplied batteries into the remote control. Ensure correct polarity of the batteries; the
+ and - markings are indicated inside the battery compartment.
Slide the cover back into the housing until it locks in place.
INSTALLING THE UFS 740sw USING THE MOUNTING KIT
The mounting kit supplied offers you the option not only of placing the receiver only a solid fl at surface,
but also of fi xing it in place and of suspending it (e.g. underneath a shelf).
When selecting the mounting location, take care that it conforms to the instructions
in the chapter "Safety Instructions"! Note the need to access the connection sockets
at the rear of the receiver and allow suffi cient space for the cables once connected!
10
CONNECTION AND SET-UP