Table of Contents
Advertisement
Current fuel consumption
The current fuel consumption level is shown in the display in litres/100 km
can use this information to adapt your driving style to the desired fuel consump-
tion.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed
.
2)
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km
» page
11. You can use this information to adapt your
1 )
driving style to the desired fuel consumption.
If you wish to determine the average fuel consumption over a certain period of
time, you must set the memory at the start of the new measurement to zero us-
ing the button
» Fig. 7
on page 12. A zero appears in the display for the first
B
approx. 300 m you drive after erasing the memory.
The display is updated regularly while you are driving.
Range
The estimated range in kilometres is shown on the display. It indicates the dis-
tance you can still drive with your vehicle based on the level of fuel in the tank
and the same style of driving.
The display is shown in steps of 10 km. After lighting up of the warning light for
the fuel reserve the display is shown in steps of 5 km.
The fuel consumption over the last 50 km is used to calculate the range. The
range will increase if you drive in a more economical manner.
Distance travelled
The distance driven since the memory was last erased appears in the dis-
play
» page
11. If you want to measure the distance travelled from a particular mo-
ment in time on, at this moment, reset the memory by setting the button
» Fig. 7
on page 12 to zero.
B
The maximum distance indicated in both memories is 1 999 km. The indicator is
set back to zero if this period is exceeded.
1)
On some models in certain countries, the display appears in kilometres/litre.
2)
On some models in certain countries, the display appears in --,- kilometres/litres if the vehicle is sta-
tionary.
Average speed
. You
The average speed since the memory was last erased is shown in the display
1)
in km/hour
» page
11. If you wish to determine the average speed over a certain
period of time, you must set the memory to zero at the start of the measurement
using the button
on the windscreen wiper lever
B
After erasing the memory, no value appears in the display until you have driven
approx. 300 m.
The display is updated regularly while you are driving.
Current speed
The current speed which is identical to the display of the speedometer
on page 8 is indicated on the display.
Coolant temperature
The current coolant temperature is shown in the display.
Warning against excessive speeds
ä
First read and observe the introductory information and safety warn-
ings
on page 11.
Adjust the speed limit while the vehicle is stationary
›
With button
» Fig. 7
A
cessive speeds.
›
Press the button
B
›
Use the button
to set the required speed limit, e.g. 50 km/h.
A
›
Confirm the speed limit that was set with button
until the setting is saved automatically (the value stops flashing).
This allows you to set the speed in 5 km/h intervals.
Adjusting the speed limit while the vehicle is moving
›
With button
» Fig. 7
A
cessive speeds.
›
Drive at the desired speed, e.g. 50 km/h.
›
Press button
to accept the current speed as the speed limit (the value flash-
B
es).
» Fig. 7
on page 12, choose the menu point Warning against ex-
to activate the ability to set the speed limit (value flashes).
, or wait approx. 5 seconds
B
on page 12, choose the menu point Warning against ex-
Instruments and warning lights
on page 12.
» Fig. 3
1
Ð
£
13
Advertisement
Chapters
Table of Contents
