Installing the cradle for the navigation unit
›
Place the cradle into the opening of the centre section of the dash panel from
above, press it down until it latches
Installing the multifunctional device
›
Firstly, place the multifunction device into the top holder
it on the underside of the cradle until it latches
Setting the tilt of the multifunction device
›
You can set the tilt to the required position by moving the multifunction device
in the direction of the arrows
» Fig. 77
Removing the multifunction device
›
With one hand, secure the multifunction device on the upper and lower edge.
›
Using the other hand, press the release button
vice.
›
Store the multifunction device in a safe place to avoid damaging it.
Removing the cradle on the multifunction device
›
Grab hold of the cradle with one hand.
›
With the other hand, press the release button
›
Remove the cradle from the dash panel from above.
›
Seal the opening for the cradle in the dash panel with the cover
Loading the user manual
›
Switch on the multifunction device by pressing button
›
Press the button
on the screen.
more
›
Press the button
on the screen.
Manual
›
Call up the required chapter by pressing the appropriate button.
Functions of the multifunction device
›
Navigation.
›
Operating the radio using multimedia devices connected via Bluetooth
›
Displaying information from the MFD, rev counter and coolant tempera-
ture
» page
8.
›
Hands-free device for mobile phones coupled with the multifunction device via
®
Bluetooth
.
›
Indicator for opened bonnet, doors and luggage compartment lid.
›
Display from the visual parking system (OPS).
›
Image viewer.
»
.
» Fig. 77
and press
B
»
.
»
.
» Fig. 77
and remove the de-
C
» Fig.
77.
A
» Fig.
76.
» Fig.
77.
D
®
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for the operation of your vehicle. Only use the system so that you
are in full control of your vehicle in every traffic situation - risk of accident!
The multifunction device must always slot securely into the cradle or be
■
safely stored in the vehicle.
Unsecured or incorrectly secured multifunction devices may be thrown
■
through the interior of the vehicle and cause injuries in a sudden driving or
braking manoeuvre or accident.
Adjust the volume to ensure that acoustic signals from outside, e.g. sirens
■
from vehicles which have the right of way, such as police, ambulance and fire
brigade vehicles, can be heard at all time.
High volumes can cause hearing damage.
■
CAUTION
Improper tilt settings can damage both the multifunction device and the cradle.
■
Always take the multifunction device with you when leaving the vehicle to pro-
■
tect it from extreme temperatures and strong sunlight. Extreme ambient temper-
atures can impair the functioning of the multifunction device and may damage
the device.
Moisture can damage the electrical contacts in the dash panel for the portable
■
multifunction device.
Never use water when cleaning the navigation unit cradle. Always use a dry
■
cloth instead.
Install/remove the multifunction device cradle without the multifunction device
■
in it.
Do not install/remove the multifunction device until the cradle for the multi-
■
function device has been installed into the dash panel.
.
Note
The range of the Bluetooth
the vehicle interior. The range is dependent on local factors, e.g. obstacles be-
tween the devices and mutual interferences with other devices. If your mobile
phone is e.g. in a jacket pocket, this can lead to difficulties when establishing the
®
Bluetooth
connection with the hands-free system or the data transfer.
®
connection to the hands-free system is restricted to
Communication
Ð
73