7
Specifying settings
1
For Windows 2000/NT 4.0, click the [Start] button, point to "Settings",
and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
–
If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other
Hardware", and then select "Printers and Faxes".
2
Right-click the printer icon, and then click "Properties".
3
Click the option tab.
4
Select "Model" from the list, and then select the model to be used from
the "Setting" drop-down list.
5
Select the option, and then specify the installation status from the
drop-down list below.
7-32
Setting up the PostScript driver (Windows)
CS175 (Phase3)