Oce CS175 Phase 3 User Manual page 55

Setting up network printing
!
Detail
Although a fixed IP address is entered without using the DHCP server in
the procedure described here, it is also possible to automatically assign
the IP address from the DHCP server. When "IP Address Setting Method"
is specified as "Auto Input" and "DHCP Setting" is set to "ON" on the
setting screen that is displayed, the IP address, subnet mask, and
gateway address settings are automatically assigned from the DHCP
server on the network, so it is not necessary to assign them manually.
However, note the following when setting "DHCP Setting" to "ON".
Check with the network administrator that the DHCP server exists. If the
DHCP server does not exist, be sure to specify settings for "IP Address",
"Subnet Mask", and "Default Gateway".
If the settings for the IP address and other items have been assigned
using the DHCP server, there is a possibility that they may be
automatically changed. When the settings for the IP address and other
items are changed, if the IP address has been used to specify a printer
on the network for printing, there is a possibility that printing may not be
possible because this machine cannot communicate with the network. If
"DHCP Setting" has been set to "ON", it is recommended that the IP
address assigned to this machine be fixed in the DHCP server settings.
CS175 (Phase3)
4
4-11