Oce CS175 Phase 3 User Manual page 75

Print operations

Hide thumbs Also See for CS175 Phase 3:

Table of Contents

Setting up network printing

Restart this machine (turn the main power off, then on again).

When turning the power off, then on again, be sure to turn the sub-

power switch off first, then the main power switch. In addition, wait

at least 10 seconds before turning the power on again; otherwise,

this machine may not function properly.

Use the NetWare server console to load MONITOR.NLM.

Select the connection information and, in the active connection

column, check that the created Pserver is connected.

CS175 (Phase3)