Setting up the PostScript driver (Windows)
Fold & Staple
You can specify to center staple and fold a printed document.
1
Click the layout tab.
2
From the drop-down list, specify the folding condition.
3
You can specify "Fold & Staple" to fold and staple a document, "Center
Staple" to staple a document in the center, or "Fold" to fold a
document in half.
Note
The Fold & Staple function is available only when saddle stitcher SD-503
is installed on optional finisher FS-514.
Hole punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finishers FS-514 and
punch kit PK-510 are installed.
1
Click the layout tab.
2
From the "Hole-Punch" drop-down list, select the number of punched
holes.
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.
CS175 (Phase3)
7
7-23