Konica Minolta Bizhub Pro 1050 User Manual page 46

Installation (Local printing)
Installing to Windows NT4.0 (PCL/PPD)
To install the PCL/PostScript PPD printer driver to Windows NT4.0, perform
the following steps. The installation should be performed by a qualified sys-
tem administrator or printer administrator.
0 In case you install the PCL driver, you can check the location of the [.inf]
file through the bizhub PRO 1050 Series CD-ROM start-up screen.
1
Turn on the computer and start Windows NT4.0.
2
Log on as an administrator (or a user entitled to install a printer).
– Exit from all active Windows applications, if required.
3
Click [Start] of the task bar. Then, select [Settings] of the Start menu
and click [Printers] from the sub-menu.
The [Printers] window appears.
4
Double-click [Add Printer] icon of the [Printers] window.
The [Add Printer Wizard] window will appear to add the printer.
5
Select [My Computer].
– When the printing system is di-
rectly connected to a computer
in which the printer driver will be
installed, select [My computer].
When the printing system is
managed by a computer in
which the printer driver will be in-
stalled, also select [My compu-
ter].
– When personal computers or workstations are connected to the
network and you want to print via the network, select [Network
printer server]. In case refer to "Installing to Windows NT4.0 (PCL/
PPD)" on Page 5-7.
6
Click [Next].
The window to select the printer port will appear.
bizhub PRO 1050/1050e/1050P/1050eP
4
4-7