Konica Minolta Bizhub Pro 1050 User Manual page 38

Installation (Installer)
4
Select [Install printers/MFPs] and
click [Next].
[Select Printer/MFP to install] win-
dow appears.
5
Select and install a copier. A copier can be selected by either way of
two as shown below.
– Selection from list detected
When a copier is detected on the
TCP/IP network, for instance, the
driver name (KONICA MINOLTA
1050 PCL) is displayed on the
screen as shown below. Then
select [Select Printers/MFPs to
Install from the List. You can se-
lect Multiple Printers/MFPs], turn
the check box on the left of the
device name to ON and click
[Next].[Confirm Installation Settings] window is displayed.
– If no copier is detected, click the
[Search Setting], enter the IP ad-
dress and subnet mask and click
the [Search].
– When specifying manually
To specify a unit manually, select
[Specify the Printer/MFP Except
for the Above] and click the [Re-
fer to].[Manual Settings] window
appears.
bizhub PRO 1050/1050e/1050P/1050eP
3
3-2