Konica Minolta Bizhub Pro 1050 User Manual page 317

Hide thumbs Also See for Bizhub Pro 1050:

Table of Contents

KONICA MINOLTA PS Printer Driver setting (Windows)

Print Density

Determines the print density of a graphic.

If a graphic appears too dark, move the slider towards [Light]. If the graphic

appears too light, move the slider towards [Dark]. The default setting is [Nor-

Smoothing - Type

Prints the curved section of characters and images smoothly, when this

printing system is used.

- [Type 1] is suitable for printing the diagonal lines of normal characters

and graphics.[Type 2] is suitable for printing the curved sections of nor-

mal characters.[Type 3] is suitable for printing the curved sections of or-

namental writings and fine characters.

- When [Off] is selected, no smoothing operation is made.

Monochromatic Convention - By Driver / By Printer

Makes a choice whether you change the graphic mode to monochrome on

the printer driver or on the printer.

Saves the consumption of toner by controlling printing density.

Prints lightly which is suitable for draft documents.

bizhub PRO 1050/1050e/1050P/1050eP