Konica Minolta Bizhub Pro 1050 User Manual page 201

PCL Printer Driver Setting (Windows)
Font Settings - Size
Selects a point size for the font to be used in your watermark by clicking the
[▼] or [▲] or by entering the size from the keyboard directly.
Text Angle - Degrees
Controls the "lean" angle of the watermark by sliding this control bar back
and forth or by typing a number in the text value box from -90 degrees to 90
degrees.
Position
Controls the position of the watermark on the page by using the vertical and
horizontal slider.
Center
Returns the position of the Current Watermark to the center of the paper.
Text Density
You can control the "density" of the watermark text with this slider. If you
slide this to the right, the "density" of the watermark text will be darker. If you
slide this to the left, it will be lighter.
Watermark - Type
Overwrite
Prints the Watermark on top of the document text. The printed text under the
Watermark will be obscured.
Transparent
Prints the Watermark transparently on the top of the document text.
Watermark - 1st Page Only
Checks to print the Watermark on the first page only.
Date/Time - Page to Print
Specifies the pages to print the date and time.
All pages
Front Cover Only
bizhub PRO 1050/1050e/1050P/1050eP
Date/Time is printed in the all pages.
Date/Time is printed in the front cover only.
8
8-56