Konica Minolta Bizhub Pro 1050 User Manual page 287

KONICA MINOLTA PS Printer Driver setting (Windows)
6
Confirm the current settings.
– If you do not change any setting,
proceed to the step 9.
7
To change the setting, select the
item to be changed and press the
[Change].
– When storing the job in the hard
disk, select [Output Application]
and press the [Change].
8
Change the settings and press [OK].
The [MACHINE] tab appears.
9
Press [START] to resume the rest of the print job.
!
Detail
For more information about the method of storing the job in and output-
ting it from the hard disk, refer to "User's Guide (Network Scanner)".
Output - Output Tray
Sets [Auto], [Multi Folder Main Tray], [Multi Folder Sub Tray], [Stacker 1 Main
Tray], [Stacker 1 Sub Tray], [Stacker 2 Sub Tray], [Saddle Stitcher Sub Tray],
[Stapler Main Tray], or [Stapler Sub Tray] as [Output Tray].
Each of them can/cannot be set in the following cases:
- An item the other than [Auto] need to be selected on the [Option] tab, re-
spectively.
bizhub PRO 1050/1050e/1050P/1050eP
10
10-35