Postscript Ppd Printer Driver Setting (Mac Os 9) - Konica Minolta Bizhub Pro 1050 User Manual
Hide thumbs
Also See for Bizhub Pro 1050:
- Operator's manual (1054 pages) ,
- Service manual (859 pages) ,
- User manual (510 pages)
Table of Contents
Advertisement
PostScript PPD Printer Driver setting (Mac OS 9)
11
PostScript PPD Printer Driver setting
(Mac OS 9)
This chapter describes the settings of the PostScript PPD printer driver using
Mac OS 9.
Basic printing method
This chapter explains how to use this printing system for printing from a Mac-
intosh.
The following shows the basic methods of use of the printing system from
the computer used.
1
Check the printing system to ensure it is turned on. Then turn on the
computer.
2
Select this printing system from the [Chooser] dialog.
–
Refer to "Selecting the printer with the Chooser" on Page 5-22 for
detailed information on selecting this printing system from the
[Chooser] dialog.
3
Open the file to be printed.
4
Select [File] - [Page Setup...] of the application.
–
You can configure the functions of this printing system further in the
[Page Setup].
–
Some functions may not be used depending on the OS you use.
The [Page Setup] dialog box will disappear.
5
Select the paper size, click [OK].
The [Page Setup] dialog box will dis-
appear.
6
Select [File] - [Print...] of the application.
The [Printing] dialog box appears.
bizhub PRO 1050/1050e/1050P/1050eP
11
11-1
Advertisement
Table of Contents
