Programming; Locking Of Eaz; Unlocking Of Eaz; Locking Of All Programming - Philips ErgoLine D330 Manual

ErgoLine D310/320
Customer Engineer Manual

Programming

For full programming instructions, see the userguide.
It is also possible for the system engineer to protect the D320 against unauthorised
programming. This is done as described below:
Terminal (Un)locking of the D320
Terminal locking offers the possibility to block
• programming of the EAZ only, or
• programming of any parameters of the terminal by unauthorised users.

Locking of EAZ:

• press PROGRAM key
• press "159"
• press PROGRAM key
• press "1" to lock EAZ programming
• press PROGRAM key.
It is now not possible to change the EAZ.

Unlocking of EAZ:

• press PROGRAM key
• press "159"
• press PROGRAM key
• press "0" to unlock EAZ programming
• press PROGRAM key.

Locking of all programming

• press PROGRAM key
• press "159"
• press PROGRAM key
• press "9" to lock all programming
• press PROGRAM key.
It is now not possible to change any setting of the terminal.

Unlocking of all programming:

• disconnect terminal
• press '4' and '6' key simultaneously while reconnecting the terminal.
Page 5-10