Installation
Cabling
Handset Cord
The handset is connected to the ErgoLine via a four wire coiled cord which termi-
nates with a four way male modular plug at the terminal side.
Pin Outs
Pin
Signal
1
Telephone
2
Microphone +
3
Microphone -
4
Telephone
Terminal Line Cord D310-2W, D320-2W, D320-4W
On both ends the terminal line cord (normal length 6 m.) terminates with an eight
way plug. See diagram below.
Pin Outs
Pin
Signal/S
1
n/c
2
n/c
3
Transmit +
4
Receive +
5
Receive -
6
Transmit -
7
n/c
8
n/c
Terminal Line Cord D310-4W
On the wall plug end the terminal line cord (normal length 6 m.) terminates with
an eight way plug. See diagram above. The terminal end of the terminal line cord
ends with a 6 way plug. See diagram below.
Pin Outs
Pin
Signal/S
1
n/c
2
Transmit +
3
Receive +
4
Receive -
5
Transmit -
6
n/c
Note: For more information on the hardware configuration of the
corresponding boards, see the Maintenance Manual for the iS3000, Part 3
Board Interfaces and Strap Settings, Chapter 4.
Signal/U
0
PN
n/c
n/c
n/c
a-wire (pos)
b-wire (neg)
n/c
n/c
n/c
0
ErgoLine D310/320
Customer Engineer Manual
Page 5-5