Cabling; Power Cord; Handset Cord; Terminal Line Cord - Philips ErgoLine D330 Manual

ErgoLine D330/D340
Customer Engineer Manual

Cabling

Power Cord (D340 only)
The connection of the power cord to the transformer is fixed. The other end of the
power cord terminates with a phono connector.
Pin Outs
Pin Signal
outside +
inside -

Handset Cord

The handset is connected to the ErgoLine via a four wire coiled cord which termi-
nates with a four way male modular plug at the terminal side.
Pin Outs
Pin Signal
1 Microphone -
2 Telephone
3 Telephone
4 Microphone +

Terminal Line Cord

On both ends the terminal line cord (normal length 6 m.) terminates with an eight
way plug.
Pin Outs
Pin Signal/S
1 n/c
2 n/c
3 Transmit +
4 Receive +
5 Receive -
6 Transmit -
7 n/c
8 n/c
Note: For more information on the hardware configuration of the
corresponding boards, see the Maintenance Manual for the iS3000, Part 3
Board Interface and Strap Settings, Chapter 4.
Page 2-2
Signal/U
0 PN
n/c
n/c
n/c
a-wire (pos)
b-wire (neg)
n/c
n/c
n/c