Downloading Examples - Philips ErgoLine D330 Manual

ErgoLine D330/D340
Customer Engineer Manual

Downloading Examples

Note: When the set is delivered from the factory the EEPROM is blank i.e. all
settings are at default. When the set is connected to a PABX the set is
automatically downloaded by the PABX. The set must then be downloaded from
the PABX using the maintenance command or the download mechanism in the
set in order to change its current settings.
Local functions such as 'One keystroke call setup', if previously downloaded on a
facility code, must also be accounted for in the function key menu downloaded.
Preparing downloading information makes use of the following commands.
CHFKDA: <MENU>, <KEY>, <KEY-LEVEL>, [[<KEY-DATA>] ,<PRIO-CODE>
[,<LED-CODE>]];
1. In this example we will assume that you wish to download two numbers for
speed dialling to an ErgoLine D330/D340 user. Assume that you wish to store
the number 0931945880635 under the first level of key 13 and the number
0931867990214 under the second level. Assume also that the user wishes to be
able to over-write the number on the first level but not the number on the
second level. The ErgoLine terminal is in function key menu (user group) 2.
Preparing the download information for speed dialling is done by executing
the following two OM commands:
CHFKDA: 2,13,0,0931945880635,1;
CHFKDA: 2,13,1,0931867990214,3;
2. In this example we will assume that you wish allocate the follow-me facility to
an ErgoLine D330/D340 user.
Look in Table 4 for the facility codes and facility numbers required for follow-
me. These are activate follow-me (facility number 32) and cancel follow-me
(facility number 33).
Assume that the facility code to activate Follow me is *21 and the code to de-
activate Follow me is #21. Assume also that the ErgoLine terminal is in function
key menu (user group) 2.
Preparing the download information of the Follow-me facility is done by
executing the following two OM commands:
CHFKDA: 2,32,0,*21,3;
CHFKDA: 2,33,0,#21,3;
The activate FM code has the analysis result (result-ID) 27 and the cancel FM
code has the analysis result (result-ID) 32 , see Table 2-4. These commands
both use key level 0 and priority code 3. In addition, the codes for prepare
Follow-me and activate/deactivate Follow-me-from-another-extension have
to be allocated.
The user will now be able to program a key for the follow-me facility.
Alternately the user may wish you to download the follow-me facility under a
specific key. The description below explains this.
Page 2-26