ErgoLine D330/D340
Customer Engineer Manual
Note: Codes 57 and 58 are used in conjunction with the other codes.
It is essential that forced transmit or receive is deactivated off before
returning to user mode. See Note
Digital Interfaces (Codes 61... 70)
Code 61 : tests Y signal 0 on PC interface
Code 62 : tests Y signal 1 on PC interface
Code 63 : sends a signal from the PC interface at 1200 baud
Code 64 : tests X interface (activates X interface mirrored mode)
1
Code 65
: tests static interface signal 0
1
Code 66
: tests static interface signal 1
1
Code 67
: tests V24
1
Code 68
: tests line interface info_0
1
Code 69
: tests line interface info_1
1
Code 70
: tests B channel loopback (only when 2 B-channels available)
1
Note
: It is recommended that after any of these tests, a hardware reset is
completed.
Page 4-4
1
on page 4-4.