Engine Oil Filter - Suzuki DF9,9 Service Manual

Four stroke outboard motor
Table of Contents

Advertisement

2-4 PERIODIC MAINTENANCE
6. Pour recommended engine oil into oil filler opening, then
install the oil filler cap.
Necessary engine oil amount:
Oil change only: 1.0 L (1.1/0.9 US/Imp. qt)
Oil filter change:1.1 L (1.2/1.0 US/Imp. qt)
Recommended oil:
• 4 stroke motor oil
• API classification SE, SF, SG, SH, SJ
• Viscosity rating
7. Start the engine and allow it to run for several minutes at
idle speed.
Turn off engine and wait for approx. two minutes.
8. Remove the oil level dipstick 3 and wipe it clean.
9. Reinsert the dipstick fully into the dipstick tube, then remove
to check oil level.
10. Oil level should be between full level Max. mark (hole) and
low level Min. mark (hole).
If level is low, add recommended oil to full level hole (Max).

ENGINE OIL FILTER

Replace initially after 20 hours (1 month) and every
200 hours (12 months).
NOTE:
When replacing engine oil filter, change engine oil at the same
time. (For oil change, see pages 2-3 and 2-4.)
Necessary engine oil amounts:
Oil filter change: 1.1 L (1.2/1.0 US/Imp. qt)
1. Remove the motor cover.
2. Remove the side covers.
3. Remove the three (3) bolts securing the oil filter cap.
4. Remove the oil filter 1.
SAE 10W-40
Full level line
Low level line

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Df15

Table of Contents